Configuring Xilica Dante Networked Audio

You have three flexible options for routing Dante networked audio to and from any Xilica Dante-enabled device:

• Drag Dante-enabled devices onto your Project View workspace

• Draw connection wires between Dante nodes of different devices

• These virtual connections create actual Dante audio routes between devices

• Verify your routes in Designer's Dante View or Dante Controller Software

• Access this scaled-down version of Dante Controller within Xilica Designer

• Select the appropriate network interface from the top-right dropdown

• Discovered devices appear as icons along the left side

• Right-click any device icon to access Dante Device Setup options

• Create routes by clicking the cross-point where transmit channels (top) intersect with receive channels (left side)

• Successfully created routes appear as green cross-points

• Download the full Dante Controller software from www.audinate.com

• This provides more configuration and management options than Designer's Dante View

• The Routing tab offers similar matrix functionality for creating audio patches

• For comprehensive documentation, visit www.audinate.com

All Dante-enabled Xilica devices support AES67. To enable this feature:

1. Open Dante Controller software

2. Double-click your device name in the routing tab

3. Open Device View

4. Navigate to the AES67 Config tab

5. Set AES67 Mode to "Enabled" from the dropdown menu