- Solaro Series
- Licensing an unlicensed Xilica Solaro device
- Using the Xilica Solaro FR1/QR1 at 96k sample rate
- Factory resetting Solaro series devices
- Updating XC-SUB Firmware
- Understanding phantom power limitations with Xilica Solaro and Gio products
- Sourcing the original Solaro QR1 external DC power supply
- Understanding the Solaro QR1/QR1-UC fan and temperature readings
- Summing or mixing channels pre-AEC
- Performing a Solaro, Gio or Sonia firmware update
- Compatibility of PoE power delivery devices for Xilica products
- Monitoring and managing Solaro DSP device resource usage
- Loading a pre-designed template to a Xilica Solaro device
- Password Protecting a Solaro DSP
- Dante routes disappear after loading the Xilica design to devices
- Understanding Dante channels and Flows for Xilica hardware
- Loading a Project File design to device(s) and going live with a system
- Exporting system programming from Xilica hardware
- Programming a Xilica system's power-on state
- Enabling Dante audio IO for the Xilica FR1-D and Xilica QR1 DSPs
- Device status indicators for Xilica Gio Bluetooth
- Troubleshoot a boot-cycling/looping Solaro QR1/FR1
- Can I add Dante to an existing FR1?
- Xilica HearClear™ AEC parameters & specifications
- Sonia Series
- Xilica Gio/Sonia support for static Dante IP addressing
- Accessing EASE files for the Sonia C5 Speaker
- Factory resetting the Xilica Sonia Amp
- Daisy-chaining Sonia C5 Speakers
- Sonia Amp Loudspeaker Compatibility
- Sonia Amp Speaker Channel Indicators
- Troubleshooting no audio through Sonia Speakers
- Configuring Sonia Amp's Power Management Feature
- Maximum cable length between Sonia Amp and Sonia C5 loudspeakers
- Sonia Amp Power Output
- Managing and updating Xilica firmware
- Xilica API for third-party control of Solaro, Gio, Sonia, Neutrino & Uno devices
- Gio Series
- Xilica Gio/Sonia support for static Dante IP addressing
- Troubleshooting a USB audio connection to the Xilica USB card (XC-SUB) or Gio USB network endpoint
- Factory resetting Xilica Gio series devices
- Controlling the Xilica Gio series products with a third-party control system
- Programming third-party control of a Xilica system
- Controlling Xilica Gio devices from XTouch or a third-party control system
- Configuring Xilica Gio USB in the Designer software
- Configuring Xilica Gio XLR's Dante networked audio
- Configuring Xilica Gio USB's Dante networked audio
- Configuring Gio Bluetooth's Dante networked audio
- User Interfaces
- Factory resetting the Xilica Lucia push-button rotary encoder
- Handling TCP connection errors between a Xilica controller and a third-party device
- Controlling multiple parameters simultaneously with Xilica XTouch, Lucia or XWP
- Programming the Lucia wall panel controller
- Managing XTouch panel resolution
- Using Lucia’s Advanced Mode
- Xilica XT80 touch panel network adapter capabilities and limitations
- Creating radio-buttons on a Xilica XTouch control panel in Xilica Designer
- Navigating between pages on a Xilica XTouch control panel
- Create Custom GUI's in XTouch
- Software Downloads
- Customer Experience
- Download the latest version of Xilica Designer
- Mainboard BIOS firmware instructions and download for Xilica Solaro (FR1/QR1)
- Download the Xilica USB driver for mainboard and recovery firmware updates
- Download Xilica DLP/DCP/DSPX firmware
- Download Xilica Uno template files
- Download X Series (XP, XD, XA) firmware
- Resetting the password for an XSeries device
- Connecting to a Xilica system from a host computer on a different network segment
- Download the XLink software for Xilica DLP/DCP/DSPX devices
- Xilica end-of-life product listing
- Xilica X Series hardware & software management
- The Xilica Rio 1616N loses its Dante static IP address
- Xilica Neutrino, Uno, Rio Dante device names revert to default
- Release Notes for Designer 4.9
- Programming & Configuration
- Download the latest version of Xilica Designer
- Download the Xilica XConsole software for X Series devices
- Download-Project-Backup-File option is missing
- Handling a Dante system fatal error in Xilica Designer
- Gio Bluetooth configurable settings in Xilica Designer
- Creating and managing presets in the Xilica Designer software
- Setting up mute sync between a Xilica Solaro processor and a UC app such as Teams or Zoom
- Activating the Xilica HearClear™ AEC license for a Solaro FR1 or QR1
- Validating or troubleshooting third-party control commands to Xilica's API
- Ethernet networking best practices for Xilica products
- Integrating Aver® PTZ camera control with Xilica Solaro solutions
- Integrating Lumens® PTZ camera control with Xilica Solaro solutions
- Integrating the Shure® MXA920™ microphone with Xilica Solaro solutions
- Integrating the Sennheiser® TeamConnect Ceiling 2™ with Xilica Solaro solutions
- Release notes for Designer 4.8
- Handling a "signal loop" error in the Xilica Designer software
- Handling Network View error messages in the Xilica Designer software
- Download the Xilica API for third-party control of Solaro, Gio, Sonia, Neutrino & Uno devices
- Using multiple Sennheiser TeamConnect Ceiling 2 micophones with the Solaro QR1/QR1-UC
- Determining your host computer's IP address for Designer software communication
- Scheduling presets in a Solaro system for a specific time/date
- Managing, saving, and transferring Designer files (.pjxml & .sxml)
- Loading a pre-designed template to a Xilica Solaro device
- Exporting a blueprint of a system design from Xilica Designer software
- Configuring Xilica Gio XLR in the Designer software
- Configuring Xilica Dante networked audio
- Troubleshooting Dante in the Xilica Designer Software
- Xilica Designer software updates
- Control Panel update is required for continued operation warning
- Partitioning a Xilica Designer Project file
- Loading a Project File design to device(s) and going live with a system
- Handling a "Load Config" error in the Xilica Designer software
- Creating User-defined devices in Xilica Designer's Project View
- Preserving run-time parameter settings when exporting the Project File (.pjxml) from hardware
- Exporting system programming from Xilica hardware
- Exporting third-party control information from the Xilica Designer software
- Using the CueCore2 Lua driver in Xilica Designer for lighting control
- Password protecting a Solaro project file
- Xilica ACC-POE-95W PoE injector power and data specifications
- Lua Engine information and resources for third-party device driver creation in the Xilica Designer platform
- Understanding carriage returns for control of third-party devices from Xilica Designer
- Xilica Room Templates with Follow Me Auto Camera Preset Recall
Download the Xilica API for third-party control of Solaro, Gio, Sonia, Neutrino & Uno devices
Back to Programming & ConfigurationXilica Solaro, Gio, Sonia (and legacy Neutrino and Uno) devices are controllable from third-party devices via the Xilica API. The document outlines the intuitive and human-readable network-based control protocol. Access the API document.
Note, third-party control of Gio and Sonia devices is supported in Designer version 4.8 and later and do not require a DSP present.
