User Interfaces
9 Articles in this Cateogry
-
Factory resetting the Xilica Lucia push-button rotary encoder
To perform a factory reset to a Xilica Lucia device, push-and-hold the front pane...
resetting encoder -
Handling TCP connection errors between a Xilica controller and a third-party device
If a third-party device can be controlled by a single controller only (e.g. a nat...
communication issues tcp errors -
Controlling multiple parameters simultaneously with Xilica XTouch, Lucia or XWP
In Xilica Designer you can "stack" like-parameters so they can be controlled toge...
simultaneous control xilica devices -
Programming the Lucia wall panel controller
The Xilica Solaro Lucia is a simple, single-gang, wall panel control with an OLED...
controller programming wall panel -
Managing XTouch panel resolution
It’s important to accurately set XTouch panel resolution in the Designer software...
resolution management xtouch panel -
Using Lucia’s Advanced Mode
Lucia menus can be defined as Advanced Mode Only menus which will hide them for n...
lucia's features advanced settings -
Xilica XT80 touch panel network adapter capabilities and limitations
The Xilica XT80 is an 8” networked and PoE-powered touch panel that runs the Xili...
network adapter limitations -
Creating radio-buttons on a Xilica XTouch control panel in Xilica Designer
Radio buttons are used to select one of a predefined set of mutually exclusive op...
radio buttons xtouch control panel -
Navigating between pages on a Xilica XTouch control panel
Control Page Buttons are used to navigate to other control pages within the same ...
control panel page navigation