GPIO

This guide shows how to light an LED automatically when audio reaches a defined threshold. Wire the LED to the GPIO Output on the GPIO Card (Follo...

This guide explains how to use a 10k potentiometer connected to the GPIO Voltage Input Card to control audio gain in your system. Wire the 10k pote...

This guide explains how to connect a physical on/off switch to a Solaro DSP and use it to mute or unmute your audio system. Connect your on/off switch...

This guide explains how to trigger different presets automatically when a door opens or closes using a magnetic contact sensor and the GPIO Card. Wire...

This guide explains how to trigger a sequenced output using a momentary input connected through GPIO. Wire the momentary trigger device to the GPIO...

This guide explains how to control a motorized screen using two momentary sink-to-ground triggers: Up and Down . Wire the screen control inputs t...