User Interfaces

Creating Radio Buttons on a XTouch Control Panel

Radio buttons allow users to select one option from a predefined set of mutually exclusive choices. To create radio buttons on a Xilica XTouch panel: ...

Create Custom GUIs in XTouch

When using the XTouch-App with your Xilica Solaro DSP, you have the ability to create custom GUIs to control your Xilica systems. By using PNG images ...

Managing XTouch Panel Resolution

It's important to accurately set XTouch panel resolution in Designer software before populating the panel with controls. If you need to change the res...

Navigating Between Pages on a XTouch Control Panel

Control Page Buttons allow users to navigate to other control pages within the same XTouch controller. To create control page navigation buttons: Clic...

Xilica XT80 Touch Panel Network Adapter Capabilities and Limitations

The Xilica XT80 is an 8" networked and PoE-powered touch panel that runs the Xilica XTouch app. The panel can communicate with the network using eithe...

Using Lucia's Advanced Mode

Lucia menus can be defined as Advanced Mode Only menus, which hides them during normal use but makes them accessible for advanced users or qualified t...

Programming the Xilica Lucia Wall Panel Controller

The Xilica Lucia is a simple, single-gang wall panel control with an OLED screen and a push-button rotary knob. It offers 32 menus for various control...

Controlling Multiple Parameters Simultaneously with XTouch, Lucia or XWP

In Xilica Designer, you can "stack" similar parameters to control them together with a single action. Open the DSP device design and a XTouch Control ...

Handling TCP Connection Errors Between a Xilica Controller and a Third-Party Device

When a third-party device can only be controlled by a single controller (such as a native control app, Xilica Designer, or an XTouch controller), the ...

Factory Resetting the Lucia Push-Button Rotary Encoder

To perform a factory reset on your Lucia device: Press and hold the front panel button for approximately 10 seconds Continue holding until the front p...